11005 Cable Disconnected CABLE: External Chiller/Debris Blower sensor cable disconnected. Trendsetter_400/800 Trendsetter_400/800_Auto Trendsetter_400/800_Proofing The firmware cannot detect the cable running to the chiller or the blower. If both devices are installed, the cable will be daisy-chained between them, so both must be checked. If the device is an MPE Trendsetter with an internal heat exchanger, please verify that 'set sys chin' is set to zero. The cable really is disconnected, or there is an intermittent connection. ..\..\ShowAllErrors.htmFirmware 0 Error Index ..\..\ShowAllCommands.htmFirmware 0 Command Index ..\..\ShowAllNVS.htmFirmware 0 NVS Index Updated: Wed Jul 16 19:32:31 2008 PST